Mk-diamond MK-2000 Manual de usuario descargar pdf (Pagina 10)

MK-2000 Revision 03/05, Effective Date March 21, 2005

Page 10

SAFETY

PRODUCT SPECIFICATIONS:

The MK-2000 is a versatile Brick Saw. Operated and used according to this manual, the MK-2000 will

provide years of dependable service.

General Description:

The MK-2000 Brick Saw is engineered as a portable brick saw powered by either a 1-1/2 or 2 horsepower

electric motor. The saw is capable of cutting masonry up to five (5) inches (127 mm) in height, thirty-one (31)

inches (79mm) in length and twenty-three (23) inches (58mm) in width in a single pass.

Motor Specifications:

Motor specifications for the MK-2000 are listed in Table 2 below. The first column shows the NEW MK-2001

with a motor of 1.5 hp and an RPM of 1725.

Horse Power 1.5 hp 1.5 hp 2.0 hp

Voltage 115v 115 v / 230 v 115 v / 230 v

Overall Amperage 13.4 13.4 a / 6.7 a 16.8 a / 8.4 a

Frequency* 60 60 60

RPM 1725 3450 rpm 3450 rpm

Weight 160 lbs 165 lbs 165 lbs

Table 2

Thermal Overload Protection:

The motor is protected by a thermal overload equipped with a manual reset.

Blade Capacity:

The MK-2000 is designed for use with a 14-inch diameter segmented wet or dry MK Diamond blade with a

.110 to .375 inch cutting width.

Masonry Types:

The MK-2000 can cut a variety of masonry types including, cinder block, slump stone block, wall brick, paver

brick, concrete block and cylinders, roofing tile, marble, granite, decorative rock or almost any other non-

ferrous material.

NOTE:

The MK-2000 is not designed to cut plastic or ferrous (metals) material.

Spring Assisted Cutting Head:

The MK-2000 is designed with a spring-assisted cutting head to allow for easier step cutting. The Cutting

Head can be locked in the down position when cutting smaller pieces.

* The MK-2000 series is also available with a 50hz motor.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 50 51

Sin comentarios

Mk-diamond MK-2000 Manual de usuario Pagina 10